ROHM RG10

by **NastyRogue** » Thu Jun 06, 2002 8:18 pm

Guys,
I'm looking for any information you might have on a ROHM RG10. It is made be Rohm GMBR in Germany. .22 caliber pistol. What I need is schematics and where I can get parts. This one is semi disassembled. My brother took it apart years ago and we have since lost the parts. Any assistance would be greatly appreciated.

by **shylock** » Thu Jun 06, 2002 8:28 pm

I know a little about RGs. You might not be able to find parts but you can probally buy another in working condition for under $50.00. Check out gunbroker.com or auctionarms.com they usually have a few up for auction. I hope this info helps.

by **Mortech** » Thu Jun 06, 2002 9:37 pm

You can also try
http://oldguns.net

by **shylock** » Sun Jul 21, 2002 12:16 pm

http://www.gunbroker.com/auction/ViewIt ... em=4623738

Here is one.............

by **Gun_Nut_2k1** » Wed Jun 22, 2005 1:38 am

I hope you don't mind but I thought I'd share my Rohm story. I picked up a Rohm that does not exist. I have a 44mag. The model indicates a 357mag Rohm but this is a true 44mag. There is no reference online to this gun. What do you think?

by **NCarUSA15** » Wed Jun 22, 2005 3:56 pm

I dont have any info but here is a pic of mine. My dad got it back in the early 60's.

by **Gun_Nut_2k1** » Wed Jun 22, 2005 4:07 pm

Gave this to an uncle. He likes it.

course i cleaned it up a lot.

by **NCarUSA15** » Wed Jun 22, 2005 4:25 pm

Nice one GN. I wish mine was more than 22 short.

by **pug** » Wed Jun 22, 2005 6:34 pm

NastyRogue you can try Numrich which calls itself Gun Parts Corporation now. They did have most of the parts for the RG10 back when I helped a friend fix his. The link is www.gunpartscorp.com look under RG.

Hmm just saw the original post date on this and hopefully you are good to go by now

by **Rattler** » Fri Jun 24, 2005 6:59 am

The Rohm mfg guns are great handguns. The 3 screw, and I have seen 5 screw copies fo the Colt single actions are excellent handguns. All pinned and recessed just like the originals. The guys at work here have several of them imported by EAA as "bounty hunter" models. One guy got a 357 mag model, and the other a 44-40. Wish I still had mine.

by **toneyc** » Sat Aug 06, 2005 11:32 am

I just inherited an old Rohm RG-10. The first thing I did was take it apart and clean it. Unfortunately, I have confused the orientation of the half moon shaped part that the rear pin goes through, just above and behind the trigger. Can anyone tell me how that piece is supposed to fit?

Thanks!!
Toney.

by **Gun_Nut_2k1** » Sat Aug 06, 2005 4:31 pm

You might buy a schematic from gun part corp. Probably the only way to get it back together. Some times this stuff can be quite intuitive. Where are you located? If in Tucson I would be glad to try to help.

by **toneyc** » Sat Aug 06, 2005 5:11 pm

I am in Texas. I looked at Gunparts.com but they didn't have a schematic listed. I will e-mail them and ask if they have one.

Toney.

by **mooreme7** » Wed Sep 09, 2009 7:06 am

toneyc:
did you find the answers that you were looking for?
unfortunately, i took the rohm rg10 that i am working on apart all by myself, and i still can not replace the piece that you had mentioned appropriately?!?!

by **Globemaster** » Wed Sep 09, 2009 9:35 am

mooreme7 wrote:did you find the answers that you were looking for?

Holy “Thread Resurrection” … I thought I was the only one searching deep into the archives of the OA2 history files.

welcome to OA2.org mooreme7 … and nice use of the OA2 ‘search-engine’

by **Once a Marine.......** » Wed Sep 09, 2009 3:24 pm

I remember those 22 short RG10 revolvers selling for $15 each at the Big5 stores back in the early 1960's.

by **Globemaster** » Wed Sep 09, 2009 3:45 pm

weblink >>> Rohm Model RG10, .22 short cal. revolver Lot #224

by **Thom** » Wed Sep 09, 2009 4:54 pm

Odds are good that you can buy a good used Rohm cheaper than you can buy the replacement parts.

by **Globemaster** » Wed Sep 09, 2009 5:37 pm

yeah, after seeing that last 'Auction Site' Sale Price ... it sure looks that way :wink:

by **Ductapeman** » Thu Sep 10, 2009 5:22 am

I've had several RG pistols over the years-- they're the only guns I never seem to get attached to. RG is Rohmische Gesellschaft, lit. "Corporation of Rohm," Rohm being a small town in southern Germany-- they started making guns in the Fifties, when the proscriptions on weapons-making ended after the war. Looking at some of the designs, I don't think anyone at the company had ever actually held a working firearm before, but they learned fast, and by the early Sixties were mass-producing the dreadful little small-caliber pot-metal pistols we remember from those days. They figured out that pot-metal won't sell here reliably, and began making the centerfire models a bit later. It's funny how things move in surges, because I too have seen several of these lately, after not having seen any at all for years . . .

by **Globemaster** » Thu Sep 10, 2009 10:21 am

Once a Marine....... wrote:I remember those 22 short RG10 revolvers selling for $15 each at the Big5 stores back in the early 1960's.

Ductapeman wrote: It's funny how things move in surges, because I too have seen several of these lately, after not having seen any at all for years

you 'Old Guys' are dating yourselves :lol:

by **Once a Marine.......** » Thu Sep 10, 2009 11:38 am

It's just that I've been around the block a few more times than you youngins... that's all.

by **Globemaster** » Thu Sep 10, 2009 1:51 pm

youngins

ROHM RG10

ROHM RG10

Who is online